For an avid do it yourself fan, something which you just cannot do without is a garage work bench. It provides the right kind of surface for cutting, routing, sanding, assembly and other projects. You can build one yourself and save on the cost of having it built by a professional. If you were wondering how to build this, all that you have to do is to get good plans which provide the required information.
A Garage work bench speeds up time spent on projects around the home and also increases safety. Though a simple project, it is always best to depend on plans which show you how to build one.
Toy Organizer Shelf
Materials
A garage bench can be designed in the available space with two sheets of plywood and five 12 foot lengths of 2 X 4 lumbers. You would have to recalculate the lumber requirement after the length of the table is determined. This will enable you to design one or two open shelves under the right side of the structure.
Location
One of the first steps to be taken is to find out how to choose the location of your garage work bench. This is based on space and on the availability of light and electricity. This will also determine its length and width.
Wood
When planning how to build this furniture, choosing the right kind of wood is also very important. Professional heavy duty benches are usually made of beech. Dried and damped beech wood is both elastic and hard enough for daily use. If you have decided to build a garage bench on your own, you have to make sure that the wood used is dry and laminated for the bench top.
For standard or lighter constructions, birch wood is normally used. Though it is less durable compared to beech, birch wood is quite hard and also light weight.
Thickness
Let us now see how to determine the thickness of the furniture. High end garage work benches like Sjobergs or Ulmia make the top up to four inches thick. This not only allows a solid fit, but also provides adequate solidity to the structure for daily use.
Steps
Plans on how to build this garage furniture would require you to first decide upon its height. Let us now see how to determine this. It should be a comfortable height for you and would depend on your own height. You should also have a method for holding the work in place at a convenient position and height so that both your hands are free to use on the tools.
The next step is to install the metal brackets into wall studs. The top of the brackets should be placed right below the snap line on the wall. Holes should be pre-drilled for the bolts. Heavy duty bolts and electric drills should be used to install the brackets. Detailed instructions on these as well as other necessary steps on how to build a garage work bench can be got from good plans.
Protection
It is best to sand the table top and legs of the furniture to prevent getting splinters off the unfinished surfaces. Once the work of building the work bench is over, it can be painted, stained or coated with paint or clear varnishes.
You can build your garage work bench in a very short time during a weekend. All that you require is a good plan which provides you detailed instructions and diagrams on how to build it. You can also save some money in the bargain.